Products

• Widely used in VCB panels 
• Input Supply 110 / 230VAC or 88 to 285VAC
• Output Voltage 24 / 30 / 48 / 110 / 220 VDC
• 100W Continuous Output Power
• 450W Momentary Impulse power for 240mS 
• Backup Period 10 / 30 / 60 Minutes
• Base / Wall Mounting
• Built-in Oring models for direct paralleling
• Built with Over voltage, Overload and Short circuit protections
• Output OFF switch to avoid unintended discharge during transit
• Separate Stored / Non stored output terminals  

• Micro-controller based Design, ERTL type tested
• Input supply range  18 ~ 90VDC or 88 ~ 285 VAC/DC
• Available up to 128 Windows
• Built with Watchdog LED
• Standard 4 operating sequences M / N / S / F
• Built with long life super bright LEDs
• Easily changeable  window legends
• Optional RS485 interface, Manned/Unmanned, Ringback sequence, AC Fail / DC Fail sense, Annunciator failure relay etc. 
• Site selectable Field inputs (NO/NC), Alarm Grouping (G1/G2), Operating sequence (M/N/S/F), Response time (10 / 30 / 50 / 100mS) 

• Wide input range 12VDC or 24 / 48 / 110 / 220 VAC/DC
• Site selectable 3 tones
• 100dBA output from 1 Mtr
• Input burden less than 15mA nominal
• Standard 96 x 96 mm moulded plastic case
• Base / Panel mountable

Optional features

• Volume Control from front knob
• Site selectable timer for self reset
•  Push button for acknowledgement
• Space saving sequential multitone output (3 in 1)

• BIS Certified
• Available from 200VA to 3KVA range
• DC Input supply 110V or 220V
• Pure sine wave 230VAC, 50Hz output
• Built with Overload and Short circuit protections
• Built with DC input reverse protection 
• DC low and high Audio visual alarm
• Build with soft start to reduce the Inrush current
• Built with Meters in 1KVA to 3KVA models
• Digital Meters are available on request
• Optional inverter fail Relay contacts

• Input Supply 110 / 230VAC or 24 / 48 / 110 /220 VDC
• Output Voltage 24 / 48 / 110 / 220 VDC
• Output Current  5 / 10 / 15 / 20 / 25 / 30 Amps
• Hot swappable Redundant models for uninterrupted supply
• 19″ 3U Rack / Base / DinRail mounting options
• Built with Overload, Short circuit protections
• Intelligent Thermal management with Convectional / Forced fan cooling
• Load and Line regulations better than 1%
• Operating Temperature : 0 to 50’C

• Input supply 110 / 230V AC (1Phase) or 110 / 440V AC (3Phase)
• Output Voltage 24 / 30 / 48 / 110 / 220 VDC
• Mains mode Continuous Load 50W / 100W
• Stored / Backup Power 50W/Sec and 100W/Sec
• Built with Mains Present indication
• Base Mounting
• Separate terminals for Stored, Non stored outputs 

• Built according to the Industry Standards
• Input Supply 110 / 230VAC
• Output voltage suitable for 12 / 24 / 48 VDC systems
• Output Current 10 / 15 / 20Amps
• Built-in Overload, Short circuit, Battery reverse protection
• Battery Deep discharge auto cutoff
• Cold start button to Turn ON the unit in DC mode
• Mains fail, DC low/fail Relay contacts for remote indications
• Base / Wall Mounting
• External battery option for easy battery maintenance & replacement
• Built-in MCBs for maximum safety

•  Input supply  88 ~ 265 VAC or 90 ~ 350 VDC
• Output Voltage 12 / 24 / 48 VDC
• Output Current 2.5 / 5 / 7.5 / 10 Amps
• Built-in Overload, Short circuit, Battery reverse protection
• Battery Deep discharge auto cutoff
• Multi colour LED for Mains ON, DC mode and Battery reverse indications
• Excellent Load & Line regulations
• Active DC OK remote signal
• Floating relay contacts for remote operation 
• High efficient design with convectional cooling 

• Available in 3 / 4 / 5 / 8 Motors version 
• Input Supply 190~300VAC
• Output voltage stable 24VDC 
• Separate output for FRTU supply
• 2 / 4 / 8 Hours Battery backup
• Built-in Battery health monitoring system
• Built-in Motor Dry run, Over load, short circuit protections
• Single / Redundant AC Power supply models
• Built with Main ON, Charger ON, DC Low, DC High, Battery Reverse, DC grounded, Battery fail indications
• Intelligent Battery Charge control